On The Bench 102c: Mike Aucutt’s Spindrift

from 2000
And finally, we look at this project from Mike Aucutt:

maspindrift

I am in my forth week of my three foot Spindrift project. The hull is 85% complete with just the bottom exposed so I can add the interior and lights. The balsa hull has been covered with three coats of resin and two coats of red acrylic to detect flaws. I scratch built the engine intakes and exhaust, the intakes will pulse blue, exhaust red.
I have started on the passenger, hallway and cockpit. When complete I will seal off the bottom hull and cut access hatches for battery access.
So far so good!

 

 

Leave a Reply