On The Bench: Kirk Schermerhorn’s Warbird part 2

From 1998

KSwb1

Having completed filling and sanding the warp engines and front and rear hull assemblies, I next attached all of these to the inner half of the upper wing.

KSwb2
Next I connected all the wiring and tacked the wires in place with dabs of clear silicon rubber. I also painted the insides of the two upper wing halves black in the vicinity of the light source for the fiber optic bundle for the forward hull.

KSwb3
Finally I attached the upper half of the upper wing. The fit of this kit has been pretty poor, so I’m now looking at a whole lot of filling and sanding before I start on the lower wing. Send you more as the work progresses

Leave a Reply